Show a process in motion
Presentor is an editor for diagrams with moving objects: requests, documents, data. In five minutes you will build a diagram of four blocks with one request moving through it, and get a file that opens for any viewer.
Press ▶ inside the example. Two requests travel from the client to the result and wait at processing. In the steps below you will build a simple version of this diagram: the same four blocks and one request. You can download the finished example under What next.
Four words
You will see these words in the editor and in the steps below.
- Block
- A box on the diagram: a participant in the process or a place where something happens. For example, “Client” or “Processing”.
- Line
- An arrow from block to block. It shows where you can go next.
- Object
- What moves through the diagram: a request, a document, a parcel. An object always starts inside a block.
- Route
- The blocks an object passes, in order. The object travels along the lines between them.
A first result in five steps
Open the editor in another tab and follow along. The clip next to each step shows the whole step and plays in a loop.
- Step 1
Add four blocks
Press Block four times. Double-click the first block, type “Client” and press Enter. Name the others the same way: “Request”, “Processing”, “Result”. Drag the blocks into a row from left to right.
Where: the panel on the left, in the Add group.
You will see: four blocks in a row. The Properties panel may open on the right; you can change the name there too.
If it did not work: the name does not change — double-click the block, a single click only selects it. To remove an extra block, select it and press Delete; Ctrl+Z undoes any action.
Blocks, names, a row. - Step 2
Connect the blocks with lines
Click the “Client” block. Open Connect and choose Connect blocks. Click the other blocks in order: “Request”, “Processing”, “Result”. Finish with Esc.
Where: the tool bar at the top centre.
You will see: three lines with arrows from “Client” to “Result”.
If it did not work: the first line did not start at “Client” — lines start at the selected block. Undo the extra lines with Ctrl+Z, press Esc, select “Client” and choose Connect blocks again.
“Client” → Connect → Connect blocks → the other blocks → Esc. - Step 3
Add an object
Click the “Client” block, then press Object.
Where: the panel on the left, below Block.
You will see: a circle with a document icon inside “Client” — that is your request. The Properties panel of the object opens on the right.
If it did not work: the message means the diagram has no blocks yet. If the object landed in the wrong block, press Delete, select “Client” and press Object again.
Select “Client” → Object. - Step 4
Set the route
In the Properties panel press Choose route along connections. The editor suggests the route “Client → Request → Processing → Result” by itself. Press Create movement or Enter.
Where: the panel on the right. If it is closed, select the object and press Properties on the left panel.
You will see: the object's route highlighted on the lines and a message at the bottom that the route is ready.
If it did not work: if the panel offers Connect and set motion instead, “Client” has no lines yet — go back to step 2.
Choose route along connections → Create movement. - Step 5
Watch the show
Press Show. The request travels from “Client” to “Result”. At the bottom is the show bar: pause, the speed Normal and Exit. Esc also exits.
Where: the button at the top right.
You will see: the request moving and, on the right, a note about the block it is passing.
If it did not work: the object stands still — it has no route; go back to step 4.
Show → watch → Exit.
Save and share
The editor runs in your browser. Save the diagram as a file to come back to it later, and download the presentation to show it to others.
- Step 6
Save the project
Press the floppy-disk icon Save project or Ctrl+S. If the Presentation title window opens, type a title and press Use this title. The browser downloads a
….presentation.jsonfile — that is your project.Where: the icon at the top right, next to Share.
To continue later: File → Open and choose this file.
If it did not work: look for the file in your browser's downloads folder. Closed the tab without saving? Open the editor again in the same browser: File → Recover browser draft.
Save project → title → Use this title. - Step 7
Share the presentation
Press Share, then Download. You get one HTML file of about 200 KB. Send it by e-mail or a messenger: the viewer opens it with a double-click in a browser — without the editor and without the internet.
Where: the button at the top right.
Note: the HTML file is only for showing. You change the diagram in the project file from step 6.
If it did not work: if the file does not open for a viewer, they need a current browser: Chrome or Edge 80+, Firefox 113+, Safari 16.4+.
Share → Download.
If something goes wrong
- The message . An object lives only in a block: do step 1 first.
- The object appeared in the wrong block. Select the right block before Object; otherwise the object goes into the first block of the diagram.
- The panel has no Choose route along connections button. The block the object stands in has no lines (step 2).
- The object stands still in the show. The object has no route (step 4).
- You did something extra. Ctrl+Z or the Undo icon at the top undoes the last action.
What next
Download the finished example — the same diagram that plays at the top of this page. Open it in the editor: File → Open. On an empty canvas the Open an example button opens the same example.
Download the exampleTry it yourself
- Add a second request: select “Client”, press Object and repeat step 4.
- Select the request and, in the Properties panel, pick another colour in the Color row.
- Speed the request up: in the Properties panel set Movement speed to Fast.
- Select the “Client” block and fill in the Description field, for example “Sends a request”.
- Press All blocks and add a block of another shape — for example, for “Result”.
More words from the editor
- Stage
- A part of the show. Objects in one stage move at the same time; stages follow one another. Their list is Presentation order at the bottom.
- Scene
- A separate sheet with its own diagram. The list of scenes is Scenes on the left panel.
- Scenario
- A variant of the show of the same diagram: another set of stages. A new project has one.
- Your own draw.io diagram
- File → Open accepts a draw.io diagram. Blocks and lines appear; add objects and routes yourself.
- Help inside the editor
- Help → Quick start lists all steps and keys on one sheet.
Questions
Do I need to install anything?
No, the editor runs in the browser. A computer with a large screen is more comfortable for building diagrams.
Where is my diagram stored?
In the files you downloaded (steps 6 and 7) and in this browser's draft until you clear it. The draft does not replace a saved file.
The editor opened in another language
Open the View menu and choose the language. This browser remembers the choice.
Is this a simulation of a real process?
No. Movement helps you explain a process. The editor does not calculate real figures and does not replace dedicated simulation software.
Now try your own diagram.
Open the editor